Table of Contents
Advertisement
3.7
Power menu
The Power menu items allow you to change the settings for the Advanced Power
Management (APM). Select an item then press <Enter> to display the configuration options.
Main
Ai Tweaker
Suspend Mode
Repost Video on S3 Resume
ACPI 2.0 Support
ACPI APIC Support
EuP Ready
APM Configuration
Hardware Monitor
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
3.7.1
Suspend Mode [Auto]
Allows you to select the Advanced Configuration and Power Interface (ACPI) state to be used
for system suspend.
[Auto]
The system automatically configures the ACPI suspend mode.
[S1 (POS) only] Sets the ACPI suspend mode to S1/POS (Power On Suspend).
[S3 only]
Sets the ACPI suspend mode to S3/STR (Suspend To RAM).
3.7.2
Repost Video on S3 Resume [No]
Determines whether to invoke VGA BIOS POST on S3/STR resume.
[No]
The system will not invoke VGA BIOS POST on S3/STR resume.
[Yes]
The system invokes VGA BIOS POST on S3/STR resume.
3.7.3
ACPI 2.0 Support [Disabled]
[Disabled]
The system will not add additional tables as per ACPI 2.0 specifications.
[Enabled]
The system adds additional tables as per ACPI 2.0 specifications.
3.7.4
ACPI APIC Support [Enabled]
[Disabled]
The system disables the Advanced Configuration and Power Interface
(ACPI) support in the Advanced Programmable Interrupt Controller (APIC).
[Enabled]
The ACPI APIC table pointer is included in the RSDT pointer list.
3.7.5
EuP Ready [Disabled]
[Disabled]
Disables the Energy Using Products (EuP) Ready function.
[Enabled]
Allows BIOS to switch off some power at S5 state to get system ready for
the EuP requirement. When set to [Enabled], power for WOL, WO_USB,
audio and onboard LEDs will be switched off at S5 state.
ASUS P7H57D-V EVO
BIOS SETUP UTILITY
Advanced
Power
[Auto]
[No]
[Disabled]
[Enabled]
[Disabled]
Boot
Tools
Exit
Select the ACPI state
used for System
Suspend.
Select Screen
←→
Select Item
↑↓
Enter Go to Sub Screen
F1
General Help
F10
Save and Exit
ESC
Exit
3-29
Hide quick links:
Advertisement
Table of Contents
