Onboard Devices Configuration - Asus ROG CROSSHAIR VIII IMPACT User Manual

SMART Self Test
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system
that shows a warning message during POST (Power-on Self Test) when an error occurs in
the hard disks.
Configuration options: [On] [Off]
SATA6G_1(Gray) - SATA6G_4(Gray)
SATA6G_1 - SATA6G_4
This item allows you to enable or disable the selected SATA port.
Configuration options: [Disabled] [Enabled]
Hot Plug
These items appears only when the SATA Mode is set to [AHCI] and allows you to
enable or disable SATA Hot Plug Support.
Configuration options: [Disabled] [Enabled]
3.6.4

Onboard Devices Configuration

The items in this menu allow you to switch between PCIe Lanes and configure onboard
devices.
HD Audio Controller
This item allows you to use the Azalia High Definition Audio Controller
Configuration options: [Disabled] [Enabled]
RGB LED lighting
When system is in working state
[All On]
[Stealth Mode]
[Aura Only]
[Aura Off]
Q-Code LED Function
[Disabled]
[POST Code Only] Show POST (Power-On Self-Test) code and CPU temperature
[Auto]
When system is in sleep, hibernate or soft off states
[All On]
[Stealth Mode]
[Aura Only]
[Aura Off]
3-16
All RGB LEDs and Functional LEDs will be enabled.
All RGB LEDs and Functional LEDs will be disabled.
RGB LEDs will be enabled, Functional LEDs will be disabled.
Functional LEDs will be enabled, RGB LEDs will be disabled.
Q-Code LED will be disabled.
on the Q-Code LED.
Show POST (Power-On Self-Test) code on the Q-Code LED.
All RGB LEDs and Functional LEDs will be enabled.
All RGB LEDs and Functional LEDs will be disabled.
RGB LEDs will be enabled, Functional LEDs will be disabled.
Functional LEDs will be enabled, RGB LEDs will be disabled.
Chapter 3: BIOS Setup