Table of Contents
Advertisement
corresponding SATA port.
SATA Controller(s) [Enabled]
Enables or disables onboard the SATA device. Configuration options: [Disabled]
[Enabled]
The following items appear only when you set SATA Controller(s) to [Enabled].
SATA Mode Selection [AHCI]
Determines how SATA controller(s) operate. This PCH SKU does not support RST feature.
Configuration options: [AHCI]
Aggressive LPM Support [Disabled]
This item is designed for LPM (link power management) support with a better
energy saving conditions. When disabled, the hot plug function of SATA ports are
disabled. Configuration options: [Disabled] [Enabled]
Smart Self Test [Enabled]
This item allows you to enable or disable the SMART Self Test on all HDDs during
POST. Configuration options: [Disabled] [Enabled]
SATA6G_1~4(Gray) [Enabled]
Allow you to enable/disable the SATA6G_1~4 port. Configuration options:
[Disabled] [Enabled]
SATA6G_1~4 Hot Plug [Disabled]
These items allow you to enable/disable SATA Hot Plug Support. Configuration
options: [Disabled] [Enabled]
3.4.6
PCH-FW Configuration
TPM Device Selection [Discrete TPM]
This item allows you to select the TPM device. Configuration options: [Discrete
TPM] [Firmware TPM]
3.4.7
Onboard Devices Configuration
HD Audio Controller [Enabled]
[Enabled]
Enables the HD Audio Device.
[Disabled]
Disables the HD Audio Device.
The following items appear only when you set the HD Audio Controller item to [Enabled].
DVI Port Audio [Disabled]
This item allows you to enable or disable DVI Port Audio.
Configuration options: [Disabled] [Enabled]
3-21
Chapter 3: BIOS setup
Advertisement
Table of Contents
