Toner Replacement Process; Prohibited. Bertl Accepts No Responsibility For Any Inaccuracies Or Omissions Contained In This Document - Lexmark X646e MFP Manual
Hide thumbs
Also See for X646e MFP:
- Menus and messages manual (135 pages) ,
- Copying manual (11 pages) ,
- Specifications (4 pages)
Table of Contents
Advertisement
Routine Maintenance
Toner Replacement Process
To get to the print cartridge users must first open the lower
front door. Then, the green buttons on both sides of the top
door must be pushed in to lift it open.
With both front doors open, the print cartridge is visible. It
comes out with leakage or problem by pulling up and out.
The cartridge can be placed on a nearby table without
making a mess.
The new cartridge is placed in from the top and guides itself
in. Once it clicks in place, the user can close the top, then
the bottom doors.
Copyright © 2006 MCA Internet, LLC dba BERTL.
All Rights Reserved. The license under which this document is made available and applicable law prohibit any reproduction or further transmission of any portion of this document. This
document may only be viewed electronically through the www.BERTL.com Web site and may not be stored in electronic or hard copy format. Any reproduction of trademarks is strictly
prohibited. BERTL accepts no responsibility for any inaccuracies or omissions contained in this document.
Lexmark X646e
5 June 2006
Page 10
Advertisement
Table of Contents
