Product Specification - Sena PS110 User Manual

1.3. Product Specification

Serial Interface
Network Interface
Protocols
Security
Modem emulation
Management
Diagnostic LED
Environmental
Power
Dimension
L x W x H (mm)
Weight (kg)
Certification
Warranty
PS110
1-port
Serial speeds 75bps to 230Kbps
Flow Control:
Hardware RTS/CTS, Software Xon/Xoff
Signals:
RS232 Rx, Tx, RTS, CTS, DTR, DSR, DCD, GND
RS422 Rx+, Rx-, Tx+, Tx-
RS485 Data+, Data-
Modem controls: DTR, DSR and DCD
10/100 Base-Tx Ethernet with RJ45 Ethernet connector
Supports static and dynamic IP address
- ARP, IP/ICMP, TCP, UDP, Telnet, SSH v2,
- SSLv3
- DNS, Dynamic DNS, HTTP, HTTPS, NFS
- SMTP with/without Authentication, pop-before SMTP,
- DHCP client, NTP, SNMP v1 & v2
User ID & Password
HTTPS
Secure terminal interface: SSH
Data Encryption: SSLv3
IP address filtering
Full support for AT commands
Web, Telnet, SSH, Serial console port or HelloDevice Manager
O/S support: Windows 98/ME/NT/2000/XP
System log
Automatic email delivery of error log
System statistics
Full-featured system status display
Firmware
Stored in Flash memory and upgradeable via telnet or web
Power
Ready (PS810 only)
10/100 Base Link
10/100 Base Act (PS410/PS810 only)
Serial Rx/ Tx for each port
Operating temperature: 0'C to 50'C
Storage temperature: –20'C to 66'C
Humidity : 90% (Non-condensing)
9~30VDC,
0.35A @ 9VDC
114 x 82 x 26 (mm)
4.48 x 3.22 x 1.02 (in.)
0.300
PS410
4-port
RJ45 connector
9~30VDC,
0.4A @ 9VDC
119 x 227 x 27 (mm)
4.68 x 8.94 x 1.06 (in.)
0.750
FCC(A), CE(A), MIC
5-year limited warranty
9
PS810
8-port
100 – 240VAC,
0.24A
119x 437 x 44 (mm)
4.69 x 17.20 x 1.73(in.)
1.56