Accessing The Web Browser Management Interface - Sena PS110 User Manual

2) The user must log into the Pro Series. Type the user name and password. A factory default
settings of the user name and password for CLI login are both root.
3) After entering correct user name and password, user can see the CLI prompts.

2.3. Accessing The Web Browser Management Interface

The Pro Series supports both HTTP and HTTPS (HTTP over SSL) protocols. The Pro Series also
contains its own Web management utility. To access the Pro Series Web management utility, enter
the IP address or resolvable hostname of the Pro Series into the web browser's URL/Location field.
This will direct the user to the Pro Series login screen. The user must authenticate themselves by
logging into they system with a correct user name and password. The factory default settings are:
Login: root
Note: Before accessing the Pro Series Web management page, the user must check the IP address
(or resolvable Hostname) of the Pro Series and Subnet mask settings.
Figure 2-17 Telnet program set up example (TeraTerm Pro)
Password: root
22