Appendix 5. Using Pro Series With Serial/Ip; A 5.1. Pro Series Vs. Serial/Ip Options; A 5.2. Connection Example - Telnet And Sslv3 Encryption - Sena PS110 User Manual

Appendix 5. Using Pro Series With Serial/IP

A 5.1. Pro Series vs. Serial/IP Options

Table A-4 Pro Series vs. Serial/IP option compatibility matrix table
Serial Port Configuration of Pro Series
Host mode Configuration
Host mode Telnet Protocol
TCP Disabled
TCP Enabled
TCP Disabled
TCP Enabled
Please note that Pro Series support only the SSLv3 encryption method, so user should select one of
"SSLv3 or TSLv1" option or "SSLv3 only" option in Serial/IP.

A 5.2. Connection Example - Telnet And SSLv3 Encryption

Step 1. Set host mode of serial port #1 of Pro Series as follows,
Host mode = TCP,
Port numer = 7001,
Telnet protocol = Enabled
Cryptography
Configuration Credentials
SSL
No login
None
required
No login
None
required
No login
Enabled
required
No login
Enabled
required
104
Serial/IP Configuration
Connection
Protocol
Raw TCP
connection
Telnet
Raw TCP
connection
Telnet
Security
Disable
Disable
SSLv3 or
TLSv1/SSLv3
only
SSLv3 or
TLSv1/SSLv3
only