Audio Issue - SOYO SY-P4VDA User Manual

After wake-up from Suspend to RAM or Standby mode, the screen
has no display but I can hear the hard disk operating.
1. Install VIA 4 in 1 driver.
2. Check the VGA card manufacturer for driver update. Or make
sure the VGA card support Suspend to Ram function
When using Geforce 3 Ti500, my system will hang up while running
3D Mark2001.
Please update the nVIDIA driver to version 2311 or newer, to solve the
problem.

Audio Issue

How can I disable the on-board Audio?
Go to the SOYO COMBO Feature in the BIOS setup, then set the
"onboard audio" to disable.
I cannot get the sound working on my system.
1. Check if the speaker wire is connected to the line out connector in
the M/B.
2. Check if the speaker power is powered on.
3. Install the audio driver supplied on our driver disc.
4. Check BIOS setup if "onboard 6CH H/W audio" is enabled.
5. If sound already installed, check our website for audio driver
update.
The sound is working in my system, but when I play CD music from
the CD-ROM, I do not get any sound. What is wrong?
This is because the 3-wire audio cable from the CD-ROM to the on-board
CDIN connector in the M/B is not connected. See manual for location of
CDIN.
The sound from my sound card is distorted when Windows start.
What is wrong?
If you are using an ISA sound card, please make sure the IRQ needed for
the sound card is set to 'Legacy ISA' in the BIOS. In other word, if your
ISA sound card takes IRQ5, then set IRQ5 to 'Legacy ISA'.
86
.