SOYO SY-P4VDA User Manual page 53

BIOS Setup Utility
3-4.1 AGP & P2P Bridge Control
Caution: Change these settings only if you are already familiar
with the Chipset.
The [AGP & P2P Bridge Control] option changes the values of the chipset
registers. These registers control the system options in the computer.
CMOS Setup Utility – Copyright ( C ) 1984-2001 Award Software
AGP Mode
AGP Driving Control
x AGP Driving Value
AGP Master 1 WS Write
AGP Master 1 WS Read
:Move Enter:Select
F5:Previous Values
After you have completed the changes, press [Esc] and follow the
instructions on your screen to save your settings or exit without saving.
AGP & P2P Bridge Control
Setting
1X
AGP Mode
2X
4X
AGP Driving Auto
Control
Manual
AGP & P2P Bridge Control
4X
Auto
DA
Disabled
Disabled
+/-/PU/PD:Value
F6:Fail-Safe Defaults
Description
This item allows you to enable /
disable the AGP-4X Mode.
This item allows you to adjust the AGP
driving force. Choose Manual to key
in a AGP Driving Value in the next
selection. This field is recommended
to set in Auto for avoiding any error in
your system.
50
Menu Level
F10:Save ESC:Exit
F7: Optimized Defaults
SY-P4VDA
Item Help
F1:General Help
Note
Default
Default