Hardware Installation
STEP 1 Install the CPU
To perform the installation of your new SY-P4VDA Motherboard, follow
the steps below:
Mark your CPU Frequency:
of your mPGA CPU that should be clearly marked on the CPU cover.
FSB 400MHz
1.5GHz (100 x 15.0 )
1.9GHz (100 x 19.0 )
CPU Mount Procedure:
processor that you have purchased separately, follow these instructions.
1.
Lift the socket handle up to a vertical position.
2.
Align the blunt edge of the CPU with the matching pinhole
distinctive edge on the socket.
1.6GHz (100 x 16.0)
2.0GHz (100 x 20.0)
To mount the Pentium
11
Record the working frequency
1.7GHz ( 100 x 17.0)
2.2GHz (100 x 22.0)
®
4 Socket mPGA478
SY-P4VDA
1.8GHz (100 x 18.0)