Change Language; Set Clock - Eclipse AVN2210p mk II Owner's Manual

Change language

Tap this button to change the language used for all the buttons and
messages you see on your TomTom.
You can choose from a wide range of languages. When you change the
language, you are also given the opportunity to change the voice.
Change
language
Warn when near POI
Tap this button to be alerted when you are near a Point of Interest (POI).
For example, your TomTom can tell you when there is a petrol station
nearby.
Warn when
near POI
To find out about POIs and about setting warnings for POIs, see Points of
Interest on page 27.

Set clock

Tap this button to set the time and to change the way the time is displayed.
The easiest way to set the time is by tapping the Sync button. Your TomTom
will then take the time from the GPS information it receives.
Set clock
For more information about GPS, see How does navigation work? on
page 57.
Note: After using Sync to set the time, you may have to adjust the hours
depending on your time zone. Your TomTom works out your time zone and
always keeps the time correct using the GPS information.
You can only use Sync if you have GPS reception, so you cannot set the clock
in this way when you are indoors.
Switch map
Tap this button to change the map you are using.
Switch map
When do I need to switch map?
You have to tell your TomTom which map you want to use. If there is more
than one map on the memory card in your TomTom, you can switch to
another map.
Note: When you switch to another map, you may need to activate that map.
41