I_Eeprom - NuDAQ PCI- 9113A User Manual

7.2.2

I_EEPROM

This file is used to enable or disable the interrupt of PCI-9113A board.
This software is a text-driven program. Because the default interrupt on
PCI-9113A board is "on", users who don't want to use interrupt function
can use this utility to turn off the interrupt of their PCI-9113A board.
7.2.2.1 Running I_eeprom.exe
After finishing the DOS installation, you can execute the utility by typing as
follows:
C> cd \ADLINK\DOS\9113\UTIL
C> I_eeprom
At first, this program prompts you to input the card type— 9113. After
specifying the card type, this program shows the instructions to guide
you to enable or disable the interrupt of your PCI-9113A board.
Calibration and Utilities 75