2.6.4
Possible AD Input Range Configurations
The JP2 and JP3 are used to setup the analog input signal range. There
are three possible combinations, 0~10V, -5V~+5V and –10V ~ +10V. See
the following table for reference.
JP2
2.6.5
Binary/2's Complement Coding Selection Jumper
JP4 set the coding method of the A/D converter. The following diagram
shows the possible configurations.
JP4
JP4
JP3
2-3
1-2
+/-5V
2-3
0~10V
Binary Coding (Default)
2's Complement Coding
1-2
+/-10V
X
Installation
11