Specifications - NuDAQ PCI- 9113A User Manual

1.3

Specifications

Analog Input (A/D)
Converter:
approximation type
Resolution: 12-bit
Input channels: 32 single-ended or 16 differential input
Isolated photo coupler: PC410
Isolation voltage rated continuous: 2,500Vrms
Instantaneous common mode rejection: 500V/us typically
Analog Input Range: (Software controlled, and jumper selection)
Bipolar: 10V, 1V , 0.1V or 5V, 0.5V, 0.05V
Unipolar: 0~10V, 0~1V, 0~0.1V
Throughput: 100K samples/sec.
Over-voltage Protection: Continuous 35V maximum
Accuracy: 0.015% of reading 1 bit
Input Impedance: 10 M
Trigger Mode: Software and Pacer
Data Transfer: Pooling, Interrupt, FIFO half-full interrupt
FIFO dEPTH: 1024 samples
General Specifications
Connector: 37-pin D-type connector
Operating Temperature: 0 C ~ 55 C
Storage Temperature: -20 C ~ 80 C
Humidity: 5 ~ 95%, non-condensing
Power Consumption: +5 V @ 960mA (max.)
Dimension: 173mm (L) x 102mm (H)
B.B. ADS774 or equivalent,
Introduction
successive
3