Sleep Operation; Setting Sleep Timer; Adjusting The Sleep Period; Sleep And Wake To Buzzer/Ipod/Radio - Jensen HD Radio JiMS-525i Owner's Manual

Docking digital hd radio system for ipod and iphone
Table of Contents

Advertisement

You can use the SLEEP Timer to fall asleep to Radio or iPod for a maximum duration of 90 minutes.

Setting Sleep Timer

Note: The default SLEEP duration is 90 minutes.
1. In Power On mode, operate the Radio or iPod as usual. Adjust the volume to the desired level.
2. Press the SLEEP Button. The Sleep Indicator
display will show 90 minutes of playing time and then return to show the current time in a few
seconds. The Sleep Indicator
The Radio or iPod will automatically turn off after 90 minutes has elapsed. The SLEEP Indicator
will disappear in the Display.

Adjusting the Sleep Period

1. With the unit In POWER ON mode, press the SLEEP Button. The display will show 60 minutes of
playing time.
2. To adjust the sleep time for less than 90 minutes, press the
will decrease in 5 minutes decrement every time the SLEEP Button is pressed. Stop pressing the
Button when your desired sleep time is displayed.
3. To adjust the sleep time for more than 5 minutes, press the
will increase in 5 minutes increment every time the SLEEP Button is pressed. Stop pressing the
Button when the desired sleep time is displayed.
4. The unit will automatically turn off after the preset sleep time has elapsed. However, if you want to
turn the radio off before the preset sleep time has elapsed, press the
power off. The LCD Backlight turns off and the SLEEP Indicator
Note: Make sure the FUNCTION is set to the iPod or RADIO position before you press the SLEEP
Button. No sound will be heard if the FUNCTION is set to the ALARM position.

SLEEP AND WAKE TO BUZZER/iPod/RADIO

1. Refer "SETTING THE ALARMS" in page 18 to set the desired wake up time (s), wakeup mode, i.e.
RADIO, iPod or ALARM and volume level.
2. Follow step 1-3 (shown above) under the "ADJUSTING THE SLEEP PERIOD" section to set the
desired SLEEP time.
The Radio is now programmed to turn off automatically at the Sleep Time you selected and then to turn
on again at the preset "Alarm Time".

SLEEP OPERATION

appears in upper right corner of the Display. The
flashes in upper right corner of the Display.
P
- 20 -
M
Button repeatedly. The sleep time
Button repeatedly. The sleep time
Button once to switch the
disappears in the Display.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents