Table of Contents
Advertisement
Basic operations
Turning on/off the System
Remote control
.
You can also turn on the System by pressing the
0
source buttons such as [CD] on the remote
control.
Setting the clock
Set the clock to use the timer setting, etc.
1
Display the "TIMER SET" indicator.
.
2
Select and confirm "CLOCK".
/
(Press repeatedly)
.
If you have already set the clock, after
0
pressing [TIMER SET], press [H]/[I]
repeatedly to select "CLOCK", then press
[SET].
3
Adjust the hour.
/
(Press repeatedly)
.
4
Repeat Step 3 to adjust the minute.
After adjusting the minute, "COMPLETE" is
displayed and the setting is completed.
14
NOTE
The clock may gain or lose 1 to 2 minutes per
0
Main unit
month. You may need to readjust the clock
periodically.
Set the clock again if the AC power cord is
0
unplugged or the System is turned off due to the
power failure.
Press
Getting started
1
.
.
2
.
Select a source.
Remote control
/ / / / /
Main unit
(Turn)
Adjust the volume.
Remote control
(Press repeatedly)
.
Adjustable range: MIN (0) to MAX (40)
0
Main unit
(Turn)
Advertisement
Table of Contents
