Adjusting The Display/Illumination - Kenwood AP-300-B Instruction Manual

Adjusting the display/illumination

Adjust according to your preferences or the
surrounding conditions.
To adjust the brightness of the display/
illumination
(Press repeatedly)
.
Each time you press the button, the brightness of
the display and illumination changes.
DIMMER OFF : Display: Bright
Illumination: Bright
DIMMER 1 : Display: Slightly dark
Illumination: Slightly dark
DIMMER 2 : Display: Dark
Illumination: Off
The brightness of the display and illumination
0
changes at the same time.
The setting will be memorized even if the System
0
is turned off.
The initial setting is "DIMMER OFF".
0
To adjust the color depth (CONTRAST)
of the display window
1
Display the color depth setting screen.
(Hold)
.
"CONTRAST SET3" will be displayed.
2
Adjust the color depth (CONTRAST).
/
(Press repeatedly)
.
Each time you press [H] / [I], the color depth
(CONTRAST) of the display window changes
in five levels ("CONTRAST SET1" to
"CONTRAST SET5").
The setting is completed when "COMPLETE"
is displayed after performing the setting.
The display returns to the original display
0
after about 3 seconds.
To return to the original display while
0
setting, press [DIMMER / CONTRAST].
The initial setting is "CONTRAST SET3".
0
33