Table of Contents
Advertisement
Listening to a BLUETOOTH device
You can listen to music from your BLUETOOTH
device, such as portable audio player through the
System.
When you connect your device for the first time, it
is necessary to register (pair) your BLUETOOTH
device and the System.
Connecting a BLUETOOTH device
1
Set the source to "BLUETOOTH".
Remote control
.
The "CONNECTING" indicator blinks, and the
"
" icon (BLUETOOTH icon) flashes slowly.
The System will connect automatically to the
BLUETOOTH device that was last
connected.
"CONNECTED" is displayed and the "
icon (BLUETOOTH icon) lights up.
CONNECTED
.
The pairing operation is necessary when
0
you connect the BLUETOOTH device for
the first time, or connect the System to the
new BLUETOOTH device.
When "
" icon (BLUETOOTH icon) lights
0
up, cancel the connection once by pressing
and holding the [BLUETOOTH] on the
remote control or [(PAIRING) I/W] on the
System.
"DISCONNECTED" is displayed then the
display disappears.
2
.
Main unit
Main unit
3
(Turn)
4
"
5
NOTE
Up to 9 BLUETOOTH devices can be registered.
0
When the 10th BLUETOOTH device is
registered, registration of the device with the
oldest connection history is deleted.
Some BLUETOOTH devices may not be
0
available to the System.
Set the System to pairing standby.
Remote control
The "
" icon (BLUETOOTH icon) flashes
quickly.
[I/W] on the main unit cannot be used while
"CONNECTING" is displayed. Use
"PAIRING" on the remote control.
Turn on the BLUETOOTH function on the
BLUETOOTH device.
Select "Bluetooth" from "Settings" on the
0
iPod touch/iPhone and Android device.
Refer to the instruction manual of your
0
device for further details.
Select "AP-300" from the list of device.
The pairing is completed and the
BLUETOOTH device is connected to the
System automatically.
When the target device requests for
0
password during pairing, enter "0000".
Start playback on the BLUETOOTH
device.
The sound from the BLUETOOTH device is
emitted from the System.
Main unit
(Hold)
23
Advertisement
Table of Contents
