Basic Operations; Turning On/Off The System; Playback - Kenwood K-575BT Basic Instruction Manual

Basic operations

Turning on/off the System

Press the [A] button on the main unit or the remote
control.
Remote control
You can also turn on the System by pressing the
0
source buttons.

Playback

BLUETOOTH Device
To play back music files in a BLUETOOTH device,
perform pairing (connection) with your device
beforehand. (p. 12)
If pairing has already been completed, you can
connect to and play back from the BLUETOOTH
device that was last connected to the System.
Operating from remote control
Operating from main unit
(Press repeatedly)
CD
Insert the CD with the label side facing up into the
center of the disc loading slot in front of the System.
Main unit
The CD will be inserted automatically when you
0
insert it in partially.
"READING" is displayed when the CD is being read.
0
When it disappears, playback starts automatically.
If the System has been set to another source, the
0
System switches to CD playback automatically.
USB Device
If the System is in the USB source, playback starts
automatically only when a USB device is connected.
If a USB device is already connected, operate as
follows.
Operating from remote control
Operating from main unit
"READING" is displayed when the USB device is
0
being read. Wait until the display disappears.
(Press repeatedly)
Continue on the next page
9