Tuner Operations; Timer Operations - Kenwood AP-300-B Instruction Manual

Compact hi-fi component system
Table of Contents

Advertisement

MP3/WMA groups and tracks are not played
back as you expect.
B
The playback order is determined by the
writing software used for recording the groups
and tracks.
The sound from the USB device or disc is
choppy.
B
The disc is dirty or scratched. Clean or replace
the disc.
B
Play MP3/WMA files that are properly written.
B
Turn off the System, disconnect and reconnect
the USB device.
Tag information is not displayed correctly
B
Check whether the tag information can be
displayed on the System. (page 34)

Tuner operations

No broadcast is heard.
B
Connect the antenna correctly. (11 page)
B
For AM broadcast, place the AM loop antenna
as near as possible to the window and adjust
the antenna direction until you obtain the best
reception.
When a FM antenna is used, extend and
B
secure the wire to the position where you
obtain the best reception.
B
Adjust the frequency to the station you want to
listen to.
Hard to listen to broadcasts because of noise.
B
Adjust the antenna.
B
Turn off and on the System.
B
Place the System away from the television.
BLUETOOTH device
Unable to pair.
B
Set the System in pairing standby, and perform
pairing from the target device, such as a
smartphone. (page 23)
Unable to connect to BLUETOOTH device.
B
Check that the BLUETOOTH function is set to ON.
B
Check to ensure that the BLUETOOTH device
supports the BLUETOOTH A2DP profile.
Unable to operate the BLUETOOTH device.
B
Check to ensure that the BLUETOOTH device
supports the BLUETOOTH AVRCP profile.
The sound is choppy. Noise is generated.
B
The System is out of the BLUETOOTH range
limitation, or there may be an equipment
interfering with the radio waves between the
System and the BLUETOOTH device. Try
placing the BLUETOOTH device nearer to the
System, or change location.

Timer operations

Unable to set the sleep timer
B
The daily timer is functioning. While the daily
timer is functioning, sleep timer does not work.
The daily timer does not work.
B
The clock needs to be set. Clock setting is
canceled when the AC power cord is
unplugged from the AC outlet, causing the
daily timer to stop functioning.
B
The System is turned on. The daily timer
functions only when the System is turned off.
39

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ap-300-h

Table of Contents