Playing Back; Canceling The Connection - Kenwood AP-300-B Instruction Manual

Playing back

You can connect to and play back from the
BLUETOOTH device that was last connected to
the System.
Remote control
.
To pause
Remote control
.
To cancel pause and start playback, press the
0
button again.
To select a track
Remote control
/
(Press repeatedly)
.
Press [T] once to skip to the beginning of the
0
next track.
Press [S] to skip to the beginning of the track
0
being played. Press twice to skip to the
beginning of the previous track.
To fast forward/reverse
During playback...
Remote control
/
(Hold)
.
To fast reverse, press and hold [S].
0
To fast forward, press and hold [T].
0
To resume normal playback, release the button.
0
24
Main unit
Main unit
Main unit
/
(Press repeatedly)
Main unit
/
(Hold)

Canceling the connection

Remote control
(Hold)
.
DISCONNECTED
.
NOTE
The connection is canceled automatically in the
following cases.
Connection is canceled on the BLUETOOTH
0
device, or BLUETOOTH function is set to OFF.
When the System or the BLUETOOTH device is
0
turned off.
When the source is changed to another audio
0
sources.
CAUTION
To connect the device to this System, the device
0
must be compatible with the
BLUETOOTH A2DP and AVRCP profiles.
The maximum distance for a possible
0
BLUETOOTH connection is 10 m. The distance
may be shorter depending on the usage
environment.
When the iPhone or smartphone is connected to
0
the System via BLUETOOTH, ring alert of phone
calls and mails can also be heard from the
speakers of the System.
This System is not equipped with a microphone
0
feature. To make a call, cancel the connection
with the System or use the microphone on the
iPhone or smartphone.
Main unit
(Hold)