HP Integrity BL860c i2 Quickspecs page 22

QuickSpecs
Models
HP Integrity BL860c i2 Base Model
HP Integrity BL860c i2
(2P)
AD399A
Processor(s)
Supports up to two (2)
processors
Cache Memory
Memory
Network Adapter
Storage Controller
Hard Drives
IO expansion
Optical Drive
Integrity iLO 3
Form Factor
DA - 13624 Worldwide — Version 19 — April 18, 2014
Two (2) processor sockets; processor modules are configured to order
Included with processors
Twenty four (24) DIMM sockets; memory DIMMs are configured to order.
Four (4) NIC ports via (2) NC532i Dual Port Flex-1010GbE Multifunction Server
Adapter
NOTE: Flex-10 capability requires OS drivers and the use of an HP Virtual
Connect Flex-10 10GbE Ethernet module. Learn more at:
www.hp.com/go/virtualconnect
NOTE: BL8x0c i2 server blades require Virtual Connect 3.00 or later when used
in Virtual Connect configurations
NOTE: Each part is autosensing 1Gb/10Gb, and can interoperate with 1Gb HP
BladeSystem c-Class interconnect components.
One (1) additional 10/100 NIC dedicated to Integrity iLO 3 Management
Integrated HP Smart Array p410i SAS Controller
Two SFF SAS drive bays; hard disk drives are configured to order
Three PCIe mezzanine card slots (PCIe Gen2 x8 interface); mezzanine cards are
configured to order.
None internal to blade server
Integrity iLO 3 and Integrity iLO 3 Advance Pack license included.
Up to 8 supported in HP BladeSystem c7000 Enclosure
Up to 4 supported in HP BladeSystem c3000 Enclosure
HP Integrity BL860c i2 Server Blade
Page 22