Roland MV-8800 Appendices page 61

Tempo Sync
Value: Off, – x4
Set this when synchronizing the Rate to the song tempo.
When not synchronizing, set this "Off." When you select
the note, the Rate setting is disabled, and the Rate is set
the note length corresponding to the tempo.
• If "?" appears before the note symbol you set, it is because
the upper (or lower) limit of the setting range has been
exceeded, and that the synchronization is not correct.
Furthermore, the precision of the Rate setting and song
tempo differ. If left to develop over long periods, the two
may gradually drift apart.
Modulation L-R Phase
Value: NonInv, Inv
This setting determines whether the timing of the pitch
wavering and undulation (rise and fall) coincides
(NonInv), or inverts (Inv).
• The oscillator (LFO) used to create these chorus and
flanger sounds separates from the common oscillator used
by the synthesizer as a whole.
Effect Block
A-61
MV-8800 Appendices