Roland MV-8800 Appendices page 59

Mv-8800 production studio
Hide thumbs Also See for MV-8800:
Table of Contents

Advertisement

Velo Sens (Velocity Sens)
Value: 0–100
This sets the degree to which the volume corresponds to
the value of the Velocity in Common. As the value is
increased, the volume level which follows the Velocity
(the strength or force at pressing key) is increased.
Ext Lev Follow (External Level Follow)
Value: 0–100
Sets the degree to which changes in the tremolo effect
are linked to and controlled by the external input volume
level. As the value is increased, you get an effect in
which the synthesizer sound is played intermittently
according to the rhythm of the external input (such as
drum phrases).
Delay
This digital delay can be switched between monaural and
alternate modes (left and right channels mutually). The
maximum delay of 2400 msec (2.4 seconds) provides long
echoes, fat, or thick sounds.
• You can also use this simply and effectively as a long delay
machine by setting the VCF input to "ExtIn" (external input)
and then raising only that.
Mode
This switches the mode of the delay.
Value
Explanation
Mono
A single-input, single-output delay
(Monaural)
ALT
A single-in, dual-out stereo delay in which the
(Alternate)
left and right outputs are alternated
(alternated delay).
Delay Time
Sets the delay time, that is, the elapsed time between
the source sound and the delay sound.
Mode
Mono
Alt
If Tempo sync parameter is not off.
Tempo Sync
Value: Off,
-
Set this when synchronizing the Delay Time to the song
tempo. When not synchronizing, set this "Off." When you
select the note, the Delay Time is set to match the length
of the note.
• If "?" appears before the note symbol you set, it is because
the upper (or lower) limit of the setting range has been
exceeded, and that the synchronization is not correct.
Furthermore, the precision of the Rate setting and song
tempo differ. If left to develop over long periods, the two
may gradually drift apart.
Feedback Level
Value: 0–100
Sets the repeat times for the delay sound. When set to 0,
each delayed sound is played only once. (if the Mode is
"Alt," delayed sound in each channel are played only
once.)
Effect Block
Value
1–2400 msec
1–1200 msec
N/A
A-59
MV-8800 Appendices

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents