Heat & Glo SLR (Cosmo) Owner's Manual page 57

4. The rock media placement jig must remain in place
while media is placed on the basepan and around the
pilot bracket.
5. Remove the rock media placement jig by removing the
screw as noted in Figure 14.5.
Figure 14.5. Remove Screw
6. Place the fl at pieces of Rock Media that were sorted out
in Step 1, carefully hide the pilot cover. See Figures
14.6 and 14.4.
Figure 14.6. Place Flat Pieces of Rock Media
SCREW SCREW
Heat & Glo • SLR • 2143-900 Rev. D • 12/08 57