Install Refractory - Heat & Glo SL-750TRSFHHIPI Owner's Manual

F. Install Refractory
CAUTION
Refractory is fragile! Carefully remove the refractory from the
packaging.
Step 1.
Remove the logs from the fi replace. Place the back wall
refractory centered against the back of the fi replace on
top of the grate tabs. While steadying the back piece
with one hand, place the left refractory against the fi re-
box left wall such that it is against the back refractory
(see Figure 14.4).
Figure 14.4
60
Heat & Glo • SL-750TRSFHHIPI • 2156-900 Rev. F • 11/08
Step 2.
Place the right refractory against the fi rebox right wall such
that it is against the back refractory (see Figure 14.5).
Figure 14.5
Step 3.
Bend left and right refractory retainer tabs to keep side
pieces from tipping (see Figure 14.6).
REFRACTORY REFRACTORY
RETAINER TAB RETAINER TAB
Figure 14.6
Step 4.
Install logs according to the install manual.