Install The Log Assembly - Heat & Glo SL-750TRSFHHIPI Owner's Manual

G. Install the Log Assembly
STEP 1.
CAUTION: Logs are fragile!
Carefully remove the logs from the packaging.
STEP 2.
LOG #1 (SRV2065-701) Place log #1 on left fl at side of
the burner assembly. Pull the log forward and slide it to
the right until the notches under the log are in the burner
grooves.
STEP 3.
LOG #2 (SRV2066-702) Place log #2 on the grate bar
and push it back against refractory. The pilot should be
centered within the large notch on log #2.
Log Set Assembly: LOGS-SL750TRS- D
Models: SL-750TRS-IPI-D, SL-750TRS-IPI-E
LOG NOTCHES
Heat & Glo • SL-750TRSFHHIPI • 2156-900 Rev. F • 11/08
2 2 3 3
1 1
1 1
1 1
SL-750TRSFHHIPI
4 4
5 5
2 2
2066-935
61