Basic Driving - Shoprider GK9 Owner's Manual

Charging GK9
To charge the Dual portable battery pack on board the scooter refer to
the pictures below.
To charge the Dual portable
battery pack off the scooter
refer to the picture at right.
Place the MALE socket of
the battery charger into
the female socket on the
battery pack taking care to
ensure that the pins line up
correctly.
Plug your charger into the
wall and turn the power on.
The charger light will glow
RED indicating the batteries are NOT fully charged. When the batteries
have reached their capacity the charger light will glow GREEN.
Please note that the right and left battery pack need to be engaged
properly before charging Onboard or Off-board.
8
Mounting
Make sure your Q.T. Scooter is on level ground
Seat yourself in the Scooter.
Turn the speed dial to slow. (Turn the dial to the left.)
Turn the on/off key to the ON position – Battery charge meter will be in
the green.
Dismounting
Ensure that your Q.T. Scooter has fully stopped.
Turn the on/off key to the OFF position
You can now dismount from the seat.

Basic Driving

Make sure you have completed the details described under "mounting".
For the standard unit, push on the accelerator lever with your RIGHT
thumb to start moving forward.
To STOP, gently release the accelerator lever.
Practise these two basic functions until you are proficient in
their use.
1