Table of Contents
Advertisement
OPERATION
COPY FROM - Use this option to replace the currently selected "User" color temperature
setup with that of another. This function can be particularly useful for creating a starting point
for a new "User" color or for accessing an unaltered factory default. It is disabled for all color
temperatures except "User". See Figure 3.21.
To create a starting point: To set a starting point for a new custom user color temperature,
select a user temperature, then highlight "Copy From" and select a temperature that is similar to
what you want. Adjust white levels from there as desired.
To use a factory default: The preset color temperature setups (3200K, 5400K, 6500K and
9300K) can be altered from within the password-pro-
tected Service menu only-note that although such an
alteration changes the setup and appearance for a pre-
set, it does not change its name. If you suspect that
you are using a preset temperature that has been
altered and you want instead to use the original cali-
brated factory color temperature without clearing the
entire projector memory, you can use the "Copy From"
option in the Advanced Color Temperature menu to set
up a "User" temperature with settings from a perma-
nent factory preset:
1. Enter the "User" color temperature you wish to update at the top of the Advanced Color
Temperature menu, such as "User 2".
2. From the "Copy From" list, select the matching temperature labeled "Factory" (such as
"Factory 5400K").
3
The setups for the "User" color temperature you entered at the top of the Advanced Color
Temperature menu will now be updated/replaced by those for the permanent factory cali-
brated temperature you selected in the "Copy From" list. Again, a "User" temperature can
be altered at any time, if desired.
Figure 3.21. "Copy From"
3-35
Factory 3.22 Presets and
"Factory"presets
Advertisement
Table of Contents
