Components; Purchase Record And Servicing - Runco Reflection VX-5c Owner's Operating Manual

INTRODUCTION
1.2

Components

Included with the VX-5c is an infrared (IR) remote keypad, high-current 13 amp rated line cord,
a 9/64" hex socket ball driver, and a VX-5c owner's manual. Make sure that you have all these
items, and note that if you have purchased this projector, a purchaser's Warranty Registration
Card is also included. Complete this card and return it directly to Runco International as soon as
possible.
1.3

Purchase Record and Servicing

Whether the projector is under warranty or the warranty has expired, Runco's extensive factory
and dealer service network is always available. Runco service technicians and dealers are fully
trained to quickly diagnose and correct projector malfunctions.
Should you encounter a problem with the projector and require assistance, contact your Runco
dealer or Runco International. In many cases, any necessary servicing can be performed on site.
If you have purchased the projector, fill out the information below and keep with your records.
Dealer Phone Number:
Projector Serial Number*:
* NOTE: The projector serial number is located on the projector's rear identification label
Dealer:
Purchase Date:
Installation Date, if
applicable:
Owner's Operating Manual
Reflection VX-3c
Projector/Controller
Digital Light Processing Projector &
Digital Scaler and Aspect Ratio Controller
THE WORLD'S FINEST HOME THEATER PRODUCTS TM
Purchase Record
1-2