Table of Contents
Advertisement
to safely change its own protocol:
1. Select the A or B option. This will ensure that once your keypad is manually changed
(see Step 2), it will still be recognized by the projector.
2. Unplug the keypad and change the protocol in the keypad as desired. Do this either
by entering the short-cut software command or by hard-wiring the keypad as
described in 2.10, Keypad Protocols and Conversion.
3. Plug the keypad back into the projector. Return to the Communications menu and
select the new protocol you have just set up in the wired keypad.
TURNING OFF THE WIRED KEYPAD: If you want to disable the wired keypad entirely,
you cannot use it to select the OFF option. This safeguard prevents you from accidentally dis-
abling the wired keypad during use. Instead, use either the built-in keypad or the IR remote
keypad to select OFF. The projector will no longer respond to the wired keypad.
Broadcast Keys
Enter a checkmark if you want keypad commands sent to one projector to be relayed to all pro-
jectors in a network. Note the
setting and allow you to control a specific projector when necessary.
Projector
Enter a three-digit number (such as "001") to assign or change a number to the projector cur-
Communications
Baud Rate
1.
Front IR
2.
3.
Back IR
4.
Wired Keypad
5.
Broadcast Key
6.
Projector
Current projector number
*To assign a new number, enter up to 3 digits
(1=001, 2=002, etc.)
Preferences
Use Preferences checkboxes and pull-down lists to alter how the projector responds to com-
mands and displays its parameters. Refer to the "Using Slidebars and Other Controls" subsec-
tion if you need help. Changes made to the Preferences menu will be saved when you exit the
menu.
key will temporarily "override" the effect of a broadcast
Proj
rently in use-if the current projector already has a number
assigned, that number will appear here. Numerical identity
38400
for projectors is required whenever you want to communi-
A or B
cate with a single projector within a multiple-projector
A or B
application (see
A or B
Keypad). If you make a mistake in assigning or changing
003
the projector number, press
For complete information about controlling multiple pro-
jectors, see Section 3.8.
3-28
OPERATION
key description in 3.8, Using the
Proj
to cancel.
Exit
Advertisement
Table of Contents
