Direct Search - Radio Shack Pro-2045 Owner's Manual

20-418.fm Page 20 Wednesday, August 4, 1999 12:42 PM
6. When the scanner finds a trans-
mission, you can:
• Store the displayed frequency
into the current monitor memory
— quickly press
• Lock out the frequency so the
scanner does not stop on it
again — press
ner resumes searching.
• Continue the search without
storing it or locking it out —
press or .
s t
• Hold the scanner on the fre-
quency — press
the rotary tuner either way one
click. appears.
-H-
Notes:
• You can press
scanner displays
through the frequencies toward
the upper or lower limits.
• If you tune to a search skip fre-
quency, the scanner displays
(see "Search Skip" on
L/O
Page 21).
• If you program all frequencies
within a limit search range as
search skip frequencies, the
scanner goes to the hold mode.
appears on the display.
-H-
• During the limit search, you can
change the modulation (NFM or
AM). See "Changing the Modu-
lation Mode" on Page 28.
Press again or press and
LIMIT
hold or for more than 1 second
s t
to resume the limit search.
20

Direct Search

A direct search lets you specify a
starting frequency, then search for ac-
tive transmissions above or below the
.
MONITOR
specified frequency.
Note: You can use the delay feature
. The scan- during a direct search (see "Delay").
S/S
or turn
LIMIT
or while the
s t
to step
-H-
1. Press .
MANUAL
2. Using the number keys, enter the
frequency (including the decimal
point) you want to start the search
from; or, enter the channel num-
ber containing the starting fre-
quency and press
to select the channel.
PROGRAM
3. Press to search up or
s
down starting from the specified
frequency. ,
-d- SEARCH
or t appear, and the next available
monitor memory flashes.
Note: If you enter an invalid fre-
quency, Error appears on the
display. To correct this, repeat
Steps 2 and 3.
4. When the scanner finds an active
frequency, you can do one of the
following:
• Store the frequency into the
current monitor memory —
quickly press
MONITOR
• Lock out the frequency so the
scanner does not stop on it
again — press
S/S
ner resumes searching.
or
MANUAL
to search
t
, and s
.
. The scan-