Transferring Afrequency To Another Channel; Transferring To An Empty Channel; Transferring To A Channel That Has A Stored Frequency; Exchanging Frequencies Between Two Programmed Channels - Radio Shack Pro-2045 Owner's Manual

20-418.fm Page 29 Wednesday, August 4, 1999 12:42 PM
TRANSFERRING A
FREQUENCY TO
ANOTHER CHANNEL
Transferring to an Empty
Channel
This feature lets you reassign a stored
frequency to another bank's vacant
channel.
Note: You cannot transfer a frequency
into or out of a priority channel.
1. Press MANUAL
2. Using the number keys or the
rotary tuner, select the channel
that has the frequency you want to
transfer.
3. Press TRANSFER
tors flash on the display.
4. Use the number keys to select the
desired bank number. The fre-
quency is automatically trans-
ferred to the selected bank's
lowest empty channel.
Note: If all that bank's channels are
already used,
FULL
case, you can select another bank.
Transferring to a Channel that
has a Stored Frequency
1. Press MANUAL
2. Press
FREQ/CHAN-LOCK
appears on the display.
CHAN
to stop scanning.
. All bank indica-
appears. In that
to stop scanning.
until
3. Using the number keys or the
rotary tuner, select the channel
that has the frequency you want to
transfer.
4. Press
TRANSFER
flashes on the display.
5. Using the number keys or the
rotary tuner, select the desired
channel.
6. Press to transfer the frequency.
s
Exchanging Frequencies
Between Two Programmed
Channels
1. Press to stop scanning.
MANUAL
2. Press FREQ/CHAN-LOCK
CHAN appears.
3. Using the number keys or the
rotary tuner, select the channel
that has the frequency you want to
transfer.
4. Press
TRANSFER
flashes on the display.
5. Using the number keys or the
rotary tuner, select the desired
channel.
6. Press to exchange the frequen-
t
cies.
twice.
CH
until
twice. CH
29