Assigning A Ctcss Tone Frequency To A Channel; Changing Or Deleting A Ctcss Tone Frequency For A Channel - Radio Shack Pro-2045 Owner's Manual

20-418.fm Page 31 Wednesday, August 4, 1999 12:42 PM
Assigning a CTCSS Tone
Frequency to a Channel
You can specify the CTCSS tone fre-
quency you want the scanner to de-
tect on a specific preprogrammed
channel.
1. Select the channel number that
has the frequency you want to
assign a CTCSS tone frequency
to.
2. Press
PROGRAM
on the display.
3. Press .
CTCSS
appear on the display.
4. Press
FREQ/CHAN-LOCK
appears on the display.
FREQ
5. Using , , or the rotary tuner,
s t
choose the CTCSS frequency.
The channel number flashes on
the display.
Note: Turn the rotary tuner clock-
wise to step up the displayed tone
frequency. Turn the rotary tuner
counterclockwise to step down the
displayed tone frequency.
6. Press . The channel number
E
stops flashing.
7. Press
MANUAL
plays the channel and frequency.
8. To turn on CTCSS for that chan-
nel, press
CTCSS
display alternates between the
frequency and the CTCSS tone
frequency.
. appears
PGM
CTCSS and 00.0
until
. The scanner dis-
. The scanner's
Changing or Deleting a
CTCSS Tone Frequency for a
Channel
1. If CTCSS is not displayed, press
. The scanner displays
CTCSS
CTCSS .
2. Select the channel number that
contains the CTCSS tone fre-
quency you want to change or
delete.
3. Press , then
PROGRAM
4. Using , , or the rotary tuner,
s t
select to delete the CTCSS
00.0
tone frequency or select another
CTCSS tone frequency to replace
the current one.
5. Press .
E
.
CTCSS
31