Radio Shack 20-404 Quick Start

Quick Start
Handheld Radio Scanner
Start Here
See the User's Guide for complete instructions.

Package contents

Scanner
Rechargeable Alkaline
Battery Holder Battery Holder
Quick Start
©2009. RadioShack Corporation.
All rights reserved. RadioShack and RadioShack.com are trademarks used by RadioShack Corporation.
Install batteries
1
20-404/PRO-404
Rechargeable
batteries
Find and store frequencies
3
Antenna
1. Press
2. Press ENT when you find an interesting frequency (not applicable for
marine or weather service banks). The bank number and StorE appear.
3. If you want to change storage banks, enter the new bank number.
4. Press ENT to store the frequency. The channel and frequency flash twice.
To cancel the operation, press TUNE/CLEAR.
Belt Clip
Program known frequencies
Refer to www.radioreference.com for a list of frequencies in your area.
1. Press PGM. PGM appears. Enter the channel number (1–200) where you
want to store a frequency, then press PGM again.
2. Use the number keys and • to enter the frequency.
3. Press ENT to store the frequency into the channel.
4. Press SCAN to begin scanning stored/programmed frequencies.
Alkaline
batteries
, , , , or . The service search starts in two seconds.
Install antenna
2
1
PGM
(Program)
02A09
Printed in China
2
3
ENT
(Enter)
GE-09D-0560
20-404/PRO-404