Chapter 12 Ethernet Configuration Commands; Interface Gigabitethernet; Interface Range Gigabitethernet - TP-Link TL-SG2216 Reference Manual

Chapter 12 Ethernet Configuration Commands

Ethernet Configuration Commands can be used to configure the Bandwidth Control, Negotiation
Mode and Storm Control for Ethernet ports.

interface gigabitEthernet

Description
The interface gigabitEthernet command is used to enter the Interface
gigabitEthernet Configuration Mode and configure the corresponding Gigabit
Ethernet port.
Syntax
interface gigabitEthernet port
Parameter
port
Command Mode
Global Configuration Mode
Example
To enter the Interface gigabitEthernet Configuration Mode and configure port 2:
TL-SG2424(config)# interface gigabitEthernet 1/0/2

interface range gigabitEthernet

Description
The interface range gigabitEthernet command is used to enter the interface
range gigabitEthernet Configuration Mode and configure multiple Gigabit
Ethernet ports at the same time.
Syntax
interface range gigabitEthernet port-list
Parameter
port-list —— The list of Ethernet ports.
Command Mode
Global Configuration Mode
——
The Ethernet port number.
67