7 7
Appliance Preparation
A. Securing and Leveling the Appliance
The diagram shows how to properly position, level, and se-
cure the appliance (see Figure 7.7). Nailing tabs are pro-
vided to secure the appliance to the framing members.
• Place the appliance into position.
• Level the appliance from side to side and front to back.
• Shim the appliance, as necessary. It is acceptable to use
wood shims.
• Bend out nailing tabs on each side.
• Keep nailing tabs fl ush with the framing.
• Secure the appliance to the framing by using nails or
screws through the nailing tabs.
111.8 cm
Figure 7.7 Proper Positioning, Leveling and
Securing of a Appliance
NAILING TABS
Heat & Glo • Soho-CE • 2111-900 Rev. D • 6/07
WARNING
Fire Risk.
• ALWAYS maintain specifi ed
clearances around the appliance.
• Do NOT notch into the framing around the appliance spacers.
Failure to keep insulation, framing or other material away from
the appliance may cause fi re.
17