Glass Assembly - Heat & Glo Balanced Flue Gas Fireplace SOHO-CE Installer's Manual

F. Glass Assembly
WARNING
Handle glass doors with care.
• Inspect the gasket to ensure it is
undamaged.
• Inspect the glass for cracks, chips or
scratches.
• Do NOT strike, slam or scratch glass.
• Do NOT operate appliance with glass door removed,
cracked, broken or scratched.
• Replace glass door assembly as a complete appliance.
Removing Glass Assembly
Pull the two lower and two upper glass assembly latches
out of the groove on the glass frame. Remove glass door
from the appliance (see Figure 12.10).
Replacing Glass Assembly
Replace the glass door on the appliance. Pull out and latch
the two glass assembly latches into the groove on the glass
frame on the bottom and top edges.
Figure 12.10 Glass Assembly
GLASS
ASSEMBLY
BOTTOM
LATCH
Heat & Glo • Soho-CE • 2111-900 Rev. D • 6/07
27