Framing And Clearances; Selecting Appliance Location - Heat & Glo Balanced Flue Gas Fireplace SOHO-CE Installer's Manual

3 3

Framing and Clearances

Note:
• Illustrations reflect typical installations and are FOR
DESIGN PURPOSES ONLY.
• Illustrations/diagrams are not drawn to scale.
• Actual installation may vary due to individual design
preference.
A. Selecting Appliance Location
When selecting a location for your appliance it is important
to consider the required clearances to walls (see Figure
3.1).
1.3 cm
A
Figure 3.1 Appliance Locations
6
A
B
C
TOP VENT,
ONE 90º ELBOW
Centimeters
In addition to these framing dimensions, also reference the following sections:
• Clearances and Mantel Projections (Sections 3.C and 11.B).
• Flue Clearances and Framing (Section 6).
Heat & Glo • Soho-CE • 2111-900 Rev. D • 6/07
NOTE: For actual appliance dimensions refer to Sec-
tion 16.
A B C D
84.1 74.0 118.7 89.2
WARNING
Fire Risk
Provide adequate clearance:
• Around air openings
• To combustibles
• For service access
Locate appliance away from traffi c areas.
B
ALCOVE
INSTALLATION
D
MINIMUM