Ce Conformity - Fujitsu D2861 Tehnical Manual

CE Conformity

Instructions for handling boards
The specific instructions in the service article for the respective end device
must be observed when installing and removing the board.
Disconnect the device plug from the shock-proof socket before carrying out
any work on an installed board.
Exercise extreme care when installing and removing all boards.
Take care not to tilt boards; they must be installed perfectly straight.
If they are incorrectly handled, the boards and the components on them, or
the other components (e.g. EMI spring contacts) and conductors can be
damaged.
Handle all locking mechanisms (engaging lugs and centering pins) carefully
when installing/removing the board or components (e.g. memory modules,
processors).
Never use sharp objects (screwdrivers) as levers.
2.2 CE Conformity
The shipped version of this board complies with the requirements
of the EC directives 2004/108/EC "Electromagnetic
Compatibility" and 2006/95/EC "Low Voltage Directive". The
board therefore qualifies for the CE marking (CE=Communauté
Européenne).
Conformity has been tested in a typical configuration of a
PRIMERGY server.
14 Technical Manual
Important notes
D2861 (BX922 S2)