Fujitsu D2861 Tehnical Manual page 12

System board for for bx922 s2
Table of Contents

Advertisement

Safety instructions
V
CAUTION!
When adding expansions to the system board, note that components
can become very hot during operation. Operators may be burned!
Connection cables to peripheral devices must be adequately
shielded.
Standards EN 50173 and EN 50174-1/2 apply for LAN cabling. The
minimum requirement is the use of a category 5 shielded LAN cable
for 10/100 Mbit/s Ethernet, or a category 5e cable for Gigabit
Ethernet. The requirements of the specification ISO/IEC 11801 must
also be taken into account.
Do not connect or disconnect any data transmission cables during a
thunderstorm (lightning hazard).
Batteries
V
CAUTION!
If the lithium battery is replaced incorrectly, there is a risk of explosion.
Batteries must only be replaced with types that are identical or that
are recommended by the manufacturer.
Please observe the information in
battery".
12
chapter "Replacing the lithium
Technical Manual
Important notes
D2861 (BX922 S2)

Advertisement

Table of Contents
loading

Table of Contents