Ce Certificate Of Conformity - Fujitsu D2679-B11 Technical Manual

CE certificate of conformity

Notes about boards
● During installation/deinstallation of the board, observe the specific instruc-
tions described in the service supplement for the respective server.
● before you make modifications on an installed board.
To prevent damage to the board, the components and conductors on it,
●
please take great care when you insert or remove boards. Take great care
to ensure that extension boards are slotted in straight, without damaging
components or conductors on the board, or any other components, for
example EMI spring contacts.
Be careful with the locking mechanisms (catches, centring pins etc.) when
●
you replace the system board or components on it, for example memory
modules or processors.
● Never use sharp objects (screw drivers) for leverage.
2.2 CE certificate of conformity
The board complies with the requirements of the EC directives
2004/108/EC regarding "Electromagnetic Compatibility" and
2006/95/EC "Low Voltage Directive". This is indicated by the CE
marking (CE = Communauté Européenne).
Compliance was tested in a typical PRIMERGY configuration.
10 Technical Manual
Important notes
D2679-B11 (TX100 S1)