Table of Contents
Advertisement
turbo brush normally used with the extendable tube, for floors and carpets, this has a
rotating brush, powered by suction, for deeper cleaning
a) use the big brush for the daily clean
b) use the turbo for the weekly deep clean
vinyl brush you can use the big brush on vinyl, and parquet, but the vinyl brush is designed
just for these surfaces – use it if you have to clean a large vinyl or parquet area
crevice tool as the name implies, down the sides of upholstery, in awkward spaces, nooks,
and crannies nothing else can reach
small brush use it to remove pet hair, lint, and dust from blinds, curtains, and upholstery; to
brush/clean awkward corners
a) the small brush is part of the crevice tool
b) to use it, turn it a bit more than 90° from the crevice tool
c) to store it, turn it back, parallel to the crevice tool.
tubes
13 Fit the extendable tube to the nozzle for floors, carpets, or hard to reach places:
a) push the tube release towards the narrow end of the tube, and keep it pressed
b) pull out as much of the inner tube as you need – if you're done, push it back
c) return the tube release to the locked position
14 Push the wide end of the extendable tube on to the nozzle.
15 Choose a tool, and push it onto the narrow end of the tube.
suction control
16 The main suction control is above the wheels.
17 Move it towards the cable rewind button C to increase suction, move it towards the on/off
switch 3 to decrease suction.
18 There's also a suction control on the nozzle – move it towards the nozzle for maximum
suction, move it away from the nozzle to reduce suction.
plug in
caution
If you've accidentally pressed the on/off switch, the cleaner will come on when you
plug it in. This could give you a bit of a start, so be careful.
19 Plug the cable into a power socket near the area to be cleaned (switch the socket on, if it's
switchable).
switching on
20 Press and release the on/off switch 3, to turn the cleaner on.
cleaning
21 Move the tool over the surface, cleaning a small area at a time.
22 When you move to a new area, overlap the previous area, to make sure none of the surface is
missed.
switching off
23 If you've finished, if you want to change tools, or if you just want to stop, press and release
the on/off switch 3, to turn the cleaner off.
finished cleaning?
24 Press and release the on/off switch 3, to turn the cleaner off.
25 Unplug the cleaner.
26 Stand clear of the cable, and press the cable rewind C.
27 Keep clear of the cable, as it rewinds at a fair lick. If it catches on anything, stop pressing, and
it'll stop rewinding.
28 We've tried not to make it too powerful, to avoid wrecking your home, so you may need to
push the plug end into the storage area manually.
4
Advertisement
Table of Contents
