Installation Of Accessories - Daewoo DWD-WD1353WC Owner's Manual

INSTALLATION OF ACCESSORIES

*Please be sure to read and follow the installation operation manual. (Pedestal Model : P-W151W)
CAUTION : The installation should ONLYbe preformed by an experienced electrician and/or plumber.
Consumers safety is the first priority.
There are many safety particulars in the guidebook and
product. Therefore, please be sure to read and abide by all
safety particulars.
Excessive load is dangerous.
In case of installing and carrying the adjustable cases of
the washer and dryer, more than two persons should
do it together. Please let children not play on the cases.
Installation methods
1. Please take out the height-high shelf and its installation
manual from the wrapped box.
2. Please untie 4 horizontal adjustment legs of the washer
and dryer.
3. Please turn and insert 4 horizontal adjustment legs in the
lower part of adjustable cases.
4. Please place the washer on the pedestal.
The washer is heavy it will require more than one person
to lift it. If your washer was previously installed, please turn
off the hot and cold water supply valves. Disconnect the
hot and cold water hoses from the water supply inlets.
Please make sure the water is completely drained from all
hoses.
5. Open the draw you will find a accessory bag containing 4
bolts, 4 lock washers and 4 flat washers.
Place the lock washer and flat washer into the bolt in that
order. To secure the washer on the pedestal, with the draw
opened, insert the 2 front bolts into each hole of the
pedestal. The holes are located on the top on the pedestal.
Please make sure you tighten the
bolts with a socket wrench.
If not the washer will vibrate.
6. In order for the washer to operate properly the
combination of the washer and pedestal must be leveled.
Please refer to page 4 Level Adjustment the same
principle applies.
7. After installing the rear bolts, attach the back cover to rear
of the pedestal with the screws provided.
8. After transferring the washer into the desired location, try
to operate the washer and check whether there are any
mechanial noises and vibration.
If you hear any noises, please check to make sure you
have removed the 4 shipping bolts. If the unit is vibrating or
rocking the unit is not properly leveled or not installed on
proper flooring.
8