F-Code Tx; E-Mail Encryption (E-Mail) - Oce cm3522 User Manual

Transmitting data
Note
For details on procedures for deleting or checking documents saved in bulletin board user boxes, refer
to the User's Guide [Box Operations].
!
Detail
This function cannot be used together with the following functions.
Quick Memory TX
Memory transmission
Total # of Pages
Polling TX
Timer TX
Overseas TX
ECM OFF
Password TX

F-Code TX

V. 34 OFF
F-Code TX
Sends data to the specified user box of the recipient by entering the SUB address and Sender ID. The
following two types of user boxes can be specified.
- Confidential transmission
– Sends data to the confidential transmission user box of the recipient. Enter the user box number as the
SUB address, and the confidential transmission password as the Sender ID.
- Relay transmission
– Sends data to the relay transmission user box when the recipient machine has the relay distribution
function. Enter the relay user box number as the SUB address, and the relay transmission password as
the Sender ID.
Specify the SUB address or transmission ID for the recipient.
!
Detail
The recipient needs to have the F-code function to use an F-code.
4.6.5

E-Mail Encryption (E-Mail)

This parameter appears when "ON" is selected for "S/MIME Communication Settings" (in [E-Mail Settings] in
the Network Settings screen in Administrator mode. Specify whether or not to encrypt the E-Mail to be sent.
Note
For details on the S/MIME communication settings, refer to the User's Guide [Network Administrator].
Océ cm3522/cm2522
4
4-65