Selecting Information - Grundig RRCD 3760 WEB Manual

Main Menu
USB
TAPE
~ Setup
Time
Alarm
~ Network Config
 3/5
Configuration
Advanced Settings
~ Device Status
Config Wizard
Device Status
Device Name
~ RRCD 3760 WEB
54
SPECIAL SETTINGS

Selecting information

You can display information on your device and the network in use.
Settings cannot be made in this menu.
1 Press »M« to open the main menu.
2 Select the »Setup« menu item with »
» 9 « to confirm.
3 Select the »Network Config« menu item with »
S
» «« and press »
– Display: »Initialization Please Wait«, the con-
nection to the Internet is being established.
4 Select »Device Status« with »
» 9 « to confirm.
– The name of the device appears, in this example,
>
»Internet Radio«.
5 Select other information with »
You can switch back to the previous information by pressing
A
» «.
– You receive information on the name of the device, the
firmware, the hardware, etc.
– »Device Name«, »Firmware Ver.«, »Bootloader
Ver.«, »Hardware Ver.«, »Network SSID«,
»Network Type«, »Encryption«, »WiFi Signal«,
»WiFi Channel«, »MAC Address«, »DHCP«, »IP
Address«, »Subnet Mask«, »Gateway IP«, »DNS
Server1«, »DNS Server 2«, »Proxy Server«,
»Proxy Hostname«, »Proxy Port«.
– Further explanations of this information can be found in the
glossary starting on page 63.
6 Close the status display with »M«.
------------------------------------------------------------------
A
9
« to confirm.
A
S «.
« or » S « and press
A
« or
« or » S « and press