Tape Mode; Selecting The Tape Input Source; Tape Playback; Fast Forward And Reverse Search - Grundig RRCD 3760 WEB Manual

Main Menu
Client
USB
~ TAPE

TAPE MODE

Selecting the TAPE input source

1
Press »M« to open the main menu.
2 Select »TAPE« with »
.
Press » « to open the tape compartment.
7
Put a tape in the compartment with the open side facing upwards
and the full reel on the right side.
Close the tape compartment.

Tape playback

1 Start playback with »
– Playback ends at the end of the side.
2 Press »II« to pause playback.
3
Press »II« to resume normal playback.
.
4 Press » « to end playback.
7
.
Press » « again to open the tape compartment.
7

Fast forward and reverse search

1 In stop mode, press »
– » § « fast forwards to the end, »
.
Press » « at the position you want.
7

Recording onto tape

Erase protection
Each new recording writes over the previous recording.
You can protect your recordings against inadvertent deletion by
breaking the protection tab in the opening in the spine of the tape.
Purchased recordings on music tapes are already protected against
accidental deletion.
If you wish to record on a protected tape, seal the opening with ad-
hesive tape.
Notes:
Only use NORMAL-type tapes (IEC I) for recording. CHROME
(IEC II) or METAL (IEC IV) tapes are not suitable.
The Ultra Bass System does not affect recording.
--------------------------------------------------------------------------------------------
A
« or » S « and press »
z
«.
§ $
« or » «.
$ « rewinds to the beginning.
9
« to confirm.
43