CH01
FM 87.50 MHz
Searching
Please Wait...
Alarm
Network Config
ATS
- >
4/5
< -
24HR
CT ON
10:00
Monday
2007.05.21
24HR
CT ON
20:00
Monday
2007.05.21
SETTINGS
Automatic station search for FM radio stations
After connecting the device to the mains power for the first time, the
automatic station search begins. It searches for radio stations and
can save up to 40 presets.
– Display: the preset (»CH«) and the frequency in rapid run-
through.
– The search has started. After the search, the demo mode is
started automatically. This shows you the functions of the de-
vice. The demo mode can be interrupted with »ON/OFF«. The
device then switches to the main menu. Afterwards, you can
save the radio stations as presets of your choice.
Notes:
The device first saves RDS stations and then normal FM stations.
The automatic station search can also be interrupted by pressing
»ON/OFF«. It starts again the next time the system is switched
on.
You can repeat the automatic station search at any time by open-
ing the main menu with »M« and selecting »
In the setup menu, press »
»
9
« to confirm. Confirm the »Start« function with »
search starts and previously stored stations are deleted.
Some RDS stations transmit an RDS time signal. If the selected
RDS station transmits time information, the time is updated auto-
matically, if you have set »CT« to »ON«. This takes about five min-
utes.
Setting the time
The following settings may only be performed in standby mode.
1
To set the time, press and hold down
– Display: »24HR«, the time, the day of the week and the date.
2
Select hours format (12 or 24 hours) with »
firm with »
9
– Display: »24HR« or »12HR« (»AM« stands for first half of
the day), time and date, the hours flash.
3
Set the hours of the time with »
»
9
«.
– The minutes flash.
----------------------------------------------------------------------------------------------------
S
« select the »ATS« item and press
«.
A
S
« from »Setup«.
9
¥
»P/RANDOM
«.
A
« or »
S
« and con-
« or »
S
« and confirm with
«. The
17