Timer Mode - Grundig RRCD 3760 WEB Manual

Alarm:
WEC OFF
Off
Volume 20
Alarm:
WEC OFF
Buzzer
Volume 20
Alarm:
WEC OFF
Buzzer
Volume 25
46

TIMER MODE

Your device has three timer modes:
– The switch-on timer, which switches the device on at a preset time
and wakes you with the input source you selected.
– The reminder timer (NAP), which reminds you by sounding the
signal tone at a preset time.
– The sleep timer, which switches the device off at a preset time.
Switch-on timer
Setting the switch-on timer
The time must be set on the device. Timer settings can only be per-
formed in standby mode.
When this setting is being made, if no button is pushed for more than
10 seconds, the device will end the process automatically. You then
have to start again.
1 Press and hold down
0:00
– Display: the switch-on time (»0:00«), the alarm and the alarm
volume. »WEC« means that the alarm is switched off at week-
ends (see next page).
2 Enter the hours of the switch-on time with »
3 Press »
or » S
4 Press »
0:00
signal or FM radio station) with »
Notes:
If you select the CD or SD/MMC alarm input source, make sure
you have inserted or connected the appropriate medium.
If CD was selected, press »
» S «. The Repeat All mode is set automatically.
If FM was selected, press »
0:00
or » S
5 Press »
----------------------------------------------------------------------------------------
»INTRO/REPEAT
9
« and enter the minutes of the switch-on time with »
«.
9 « twice and select the alarm tone (CD, memory card,
9
9
«.
9 « and set the volume with
≈
«.
A
« or » S
A
« or » S «.
« and select the track with »
« and select the preset with »
ß +
»– «.
«.
A
«
A
« or
A
«