Lights And Power Outlet; Instrument Panel; Bypass Valves - Husqvarna P520 D Operator's Manual

Lights and power outlet

The lights are switched on and off using the switch on the

instrument panel.

A seat heater or mobile phone charger are examples of
articles that can be connected to the power socket.
The power outlet is switched on and off using power switch on
the control panel.
The voltage is 12 V.
The power outlet is fuse protected by its own fuse. The fuse
for the power outlet is placed in the electrical connection box,
behind the side plate on the control panel.
PRESENTATION
Instrument panel
The indicator lights are on the steering console under the
steering wheel.
1 Temperature gauge for coolant. The engine is liquid
cooled. If overheating of the engine is indicated the first
action to take is to reduce the engine temperature by
running the engine at idle with no load. Turn off the power
transmission
Check coolant level and top up if necessary. Also check
that the radiator grill and radiator are clean and not
clogged. The grill is at the rear of the machine and on top
of the bonnet.
2 Oil pressure, check oil level and top up if necessary.
3 Ignition
4 Battery charging
5 Power transmission connected
6 Parking brake
7 Spotlight
8 Switch for the lights

Bypass valves

Hydraulic pressure must be released in order for the ride-on
mower to be moved when the engine is shutoff.
The hydraulic pressure is opened and closed with a bypass
valve.
If you try to drive the machine without hydraulic pressure, it
will not move. The drive on the axle is disengaged if one valve
is open.
The P520 D has two valves, one valve for the front axle and
one for the rear axle.
IMPORTANT! Always drive the machine with both valves
closed.
1 2 3 4 5 6
7
8
– 15
English